Duncan Bruce Ballash

Level 3: add walls + alter interior layout to provide separate tenant division on level 3.

Alteration of (e) large refrigeration/freezer spaces, demo of (e) u nits & (e) slabs ongrade under units, install of new insulated slab, new refrigeration/freezer units w/high piled storage racks, & associated mep. revision apn#202006138695

Revision to approved permit 201809251300-s3. to revise names of 4 assembly spaces to clarify room use for a3/a2.

Installation of a recessed floor scale. replacement of southern entry door in kind.

Exterior signage including building donor name

Exterior signage including iluminated kqed logo on metal panel

Exterior signage including kqed logo on curtain wall

Install temporary structural steel interface to support temporary video display wall for exhibition. interface is between display structure and existing building structure. maher n/a

Interior renovation of level 4 including light demolition and minor layout changes of office spaces, and new lighting. maher na

Interior renoavtion of (e) office space w/ light demo of private offices and installation of portable sound booths and open workstations

Enlarge entry & expand footprint @ nw corner. add mezz at roof level for multipurpose meeting room, catering kitchen, lunch room & roof terrace, renovation of interior spaces, seismic improvements, mep upgrades. maher n/a.

Permanent assembly permit including change in occupancy from a3 to a2 for 6 e spaces and change in occupant load/load factor in 2 spaces (levels 2/3) no physical changes to e building or fire l/s systems in this scope.all new revisions clouded in bold.changes due to 2016 code cycle/minor constructn

Tenant improvement- convert some (e) warehouse apce in building for use as a small brewery and small tap room/bar. work includes addition of a bathroom, ramp, railings, and egress doors. change of occupancy a-2, f-2 (building) and tap room (retail), maher n/a

Installation and seismic bracing of shelving units on floors; basement, 1,2, 9 & 10 of the sfmoma are museum. ref pa 2012-1109-3897s (r1)

7th & 8th fl: installation of new aluminum frame and millwork structure sliding wall panels of the sfmoma conservation studios for storage of artist materials. all storage portions of structure are <10' aff. revision pa 201211093897 to install only sliding panel structure

Temporary modification of extg sfmoma expansion freight elevator l including removal of stop at ground floor level 1 and infill of extg door opening with 2 hour fire rated partition. fire alarm modifications under seperate permit. elevator modifications to be submitted to state elevator division

7th floor:installation of a gypsum board ceiling in a 550 sq.ft. gallery on level 7, work to include modification to existing mechanical supply diffusers and new lighting. ref. to sfmoma expansion pa#201211093987 & temp. wall pa#201507302945. n/a ordinance #155-13

33rd floor tenant improvement of a 600 sq ft area. no structural or plumbing work. demo & patching of interior doors. walls, ceilings, & finishes, new power/data outlets & lighting. compliance with ord 155-13 not rquired

21st floor tenant improvement, interior office remodel including mechanical, electrical & plumbing work, construction of non-rated partitoins & interior finishes.

#201-tenant improvement on partial 1st floor of building, minor wall demolition and construction, rerouting/capping of outlet switches and lighting, casework renovation