Amer Alkloub

Revision to pa# 202201216398, revise equipment platform structural details, no change to batteries, no change to antennas, no revised electrical work.all structural work interior not visible from st.

Revison to bpa#202203250944, replace (e) antenna mounts

At&t mobile remove and replace 2 frp enclosures. install 3 new at&t panel antennas; install 2 surge protectors; install 2 frp enclosure, install signage; install 1 large band; 1 rectifier and 1 string of g's battery, install 2 dc trunk, install 62 lf of cable tray cover

Relocateion of (3)(e) atenana, rmeove (6) atenna, install (6) antenna, (1) baseband, (1) string, (2) rectifiers, (1) dc12 surge, remove u850 cabinet. at&t mobility project

Remove 6 antennas, install 6 antannas, remove 3 rrus, remove (e) radomes, install new radomes, install 1 baseboard in cabinet, (e) ladder hookes to be removed and replaced, install striping and barriers per eme

Mod (e) at&t site: remove 9 (e) antennas, install 5 new antennas. install 1 new baseband 6648 in (e) rack. install 1 new string of batteries (marathon m12v180ft) 180att.

Modify (e) at&t macro site: remove 6 antennas. install 6 antennas. remove 6 rru's. install signage / barricades / stripping per eme report. install 4 rectifiers. install 1 6648 baseband.

9 antennas , install rru's, remove 12 rru's, install 1 squid, install 1 power eme, install 1 baseband, remove strings, install 5 strings. install 3 rectifiers.

At&t: swap 9 (e) antennas with 9 new antennas, remove 12 rrus, install 6 rrus, install new barricades and stripping, install 2 battery strings, install 4 rectifiers, install 1 new baseband.

At&t: remove & install 6 antennas, remove/replace frp radome, install signs & warning/ barricades/ striping per eme report. install 1 baseband within purcell. install 1 string in battery cabinet. install 1 rectifier.

At&t remove (e) omni antennas; install 9(n) roof mounted anteannas (2 inside vent pipes, 6 inside (n) frp box); remove (e) equipment on ground; install (n) equipment plat form w/(n) equipment on roof top; install (n)200a meter

Swap existing antennas with new antenna (5), install 1 rrus, install 1 dc6 surge, install 1 power trunk, install 1 baseboard, install 1 recttifier, install 1 dc 12 surge supplier.

At&t: remove 9 antennas, install 9 antennas, remove 6 rrus, install 3 rrus. paint rf striping per eme. install 1 baseband, install 1 battery string. install 1 rectifier in cabinet.

At&t modification: swap (9) antennas, paint to match. remove (9) existing rrus. install 12 new rrus, install (n) battery rack.

At&t modification: remove(6)(e)antennas & frp screens from north facade & install(13)(n)antennas on rooftop screening within(3)(n) frp scn boxes; relocate(e)equipment area from northern rooftop to s rooftop near(n)antenna location, screened within(e)mechanical scn wall; install(12)(n)batteries @

At&t modification: install 4 new 5g antennas on new pipe mounts; swap 3 extg antennas with 3 new antennas; remove 6 extg rrus & install 3 new rrus; install other small equipment; install new fiber. no change to extg batteries.

Att modication: r&r (6)(e)rrus w/(3)(n)rrus; install (1)(n) string of batteries.

Att modification 44 6 e antennas with 6 new antennas r+r 3 e rrus w 3 new antennas, r and r 6 e batteries w 6 n batteries

Rooftop: att modification of cell site: remove 6 (e) rru's; install 3 (n) rru's & 3(n) dcg; install toher small equipment. no change to batteries. no change to antennas.